Dinel RFLS-35 Handmatig - Pagina 4

Blader online of download pdf Handmatig voor {categorie_naam} Dinel RFLS-35. Dinel RFLS-35 6 pagina's. High-frequency limit level sensor

It is recommended to install sensors in a

horizontal pipe inclined from the side.

In the case of side wall mounting. it is necessary to avoid long fitting tubes, where sensed medium could adhere (image on the

left). We recommend mounting the sensor so that the whole measuring electrode is inside the tank (image on the right).

Installation of the scanner for reliable checking of the level of a fluid with foam on the surface. Sensitivity of the sensor can be

set to detect the liquid interface with foam. After a drop in the fluid level, the sensor does not react to coatings of foam on the

electrode.

The sensor can be mounted in a tank or at medium inlets. After setting to the level of the given media the sensor does not react

to the current of flowing medium.

Upon vertical installation of the sensor in

a pipe, pay attention to potential formation

of air pockets,

the LED indicator "STATE" is lit

or adhering remnants of viscous

media at the bottom of the pipe.

the LED indicator "STATE"

is not lit

RFLS-35-dat-4.6