Dinel Flexi Watch FLD-32 Gebruiksaanwijzing - Pagina 9

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Dinel Flexi Watch FLD-32. Dinel Flexi Watch FLD-32 16 pagina's. Thru-wall level switch

Pagina afdrukken

10 . C

ONNECTiNg TO ThE aNalyTiCal uNiTS

The thru-wall level switch FLD-32 "Flexi Watch" can be connected to various analytical units. See

below for connection examples of this setup. This provides general connection of the sensor

to the relay coil and to logical unit. Connection to specific analytical units is also described.

power

supply unit

Connecting of the sensor FLD-32

to the relay coil

Connecting of the sensor FLD-32 to the evaluation units SDSU-1222-W and DSU-1222-W

This unit is intended for evaluation of sensors programmable using third wire (FLD-32 "Flexi

Watch"). It contains the programming buttons for setup of sensors and stabilized 12 V DC

power supply. It enables the level control (sensing of the amount of liquid in tanks, wells, etc.)

This unit is suitable for the FLD-32 variant with programming wire setup. DSU-1222-W unit is

suitable for the type with magnetic pen setup.

Connecting of the sensor FLD-32 to the evaluation unit SDSU-1222-W

FLD-32

fld-32

power

supply unit

Connecting of the sensor FLD-32

to the PLC logical unit

Legend:

wh – white

bn –brown

gn – green