3Com Etherlink 3C905B-TX Beknopte handleiding - Pagina 8

Blader online of download pdf Beknopte handleiding voor {categorie_naam} 3Com Etherlink 3C905B-TX. 3Com Etherlink 3C905B-TX 12 pagina's. Etherlink pci network interface cards
Ook voor 3Com Etherlink 3C905B-TX: Beknopte handleiding (15 pagina's), Beknopte handleiding (12 pagina's)

Pagina afdrukken

AST

THER

4 Click the Device Manager tab.

A list of devices appears, arranged by type.

5 Double-click Network Adapters.

The name of the installed 3C905B-TX NIC appears:

3Com Fast EtherLink XL Adapter (3C905B)

If this name does not appear or if a yellow exclamation

point appears next to it, see Chapter 4 in the user guide.

Windows 98

To install the network driver in a PC running Windows 98,

insert EtherDisk diskette 2 when the Add New Hardware

Wizard starts and prompts you for a diskette or CD.

Do not insert EtherDisk diskette 1 because the installation

will be unsuccessful.

Continue with the installation by following the prompts on

the screen.

Conﬁrming Installation

To conﬁrm that the network driver was successfully

installed in a PC running Windows 98:

1 Open the Windows Start menu, select Settings, and

then select Control Panel.

2 Double-click the System icon, and then select the

Device Manager tab.

3 Double-click Network adapters and make sure that the

name of the Fast EtherLink XL NIC appears.

If a red X appears next to the name of the NIC, the

installation was not successful. If this occurs, verify that

the NIC is not disabled by following these steps:

a Double-click the name of the NIC.

b Select the General tab.

c Make sure that Disable in this hardware proﬁle is

XL PCI 10/100BASE-TX NIC Q

INK

not selected.

UICK

UIDE