3Com Etherlink 3C905B-TX Beknopte handleiding - Pagina 5
Blader online of download pdf Beknopte handleiding voor {categorie_naam} 3Com Etherlink 3C905B-TX. 3Com Etherlink 3C905B-TX 12 pagina's. Etherlink pci network interface cards
Ook voor 3Com Etherlink 3C905B-TX: Beknopte handleiding (12 pagina's), Beknopte handleiding (15 pagina's)
Pagina afdrukken
Installing the NIC in the PC
5
et
te
If you are planning to install the Remote Wake-Up cable
choose an empty PCI slot that is close to the matching
Remote Wake-Up connector on the PC motherboard.
Remote Wake-Up is supported by the following NICs:
3C905C-TX-M
3C905B-TX
3C905B-TX-M
3C905B-COMBO
3C905B-FX
3C900B-FL
If you have a 3C905C-TX-M NIC and your PC is compliant
with PCI 2.2, Remote Wake-Up is automatically enabled
through the PCI bus. The Remote Wake-Up cable is
not required.
Carefully insert the NIC in the PCI slot.
Figure 1 Installing the NIC
1 Remove slot cover
i
7 2 Insert NIC
y
er
-
PCI slots