Dinex TSBH2 Bedienings- en onderhoudshandleiding - Pagina 5

Blader online of download pdf Bedienings- en onderhoudshandleiding voor {categorie_naam} Dinex TSBH2. Dinex TSBH2 8 pagina's. Base heater

Pagina afdrukken

Replacement Parts

INFO: Defective parts must be replaced according to

the spare parts list.

THERMOSTAT REPLACEMENT

WARNING: Turn the master switch to the "0" position and

remove plug from receptacle.

1. Remove the four screws on the access panel and remove

the panel.

2. The Hi-limit thermostat is located in the lower central

area. Remove the wires and screws, then replace the

Hi-limit thermostat.

3. The thermostat is located on the left-hand side, just

below the blower motor. Remove the wires and screws.

4. Remove the eight screws on the heater unit and remove

the unit.

5. Remove the capillary tube sensors and replace the

thermostat.

6. Remount the access plate.

HEATER REPLACEMENT

WARNING: Turn the master switch to the "0" position and

remove plug from receptacle. To avoid burns allow the unit

to cool down.

1. Remove the four screws on the access panel and remove

the panel.

2. Remove the wires of the master switch, the air exhaust

fan and the Hi-limit control.

3. Unscrew the eight screws on the heater and remove the

heater.

4 . Un s c rew the four nuts on the heating unit of the heating

d ev i ce and re m ove the ve nt i l ation panel.

5. The heating spiral can now easily be removed by

unscrewing the screws and nuts.

IMPORTANT: Make sure not to bend the motor shaft or

the blades of the blower wheel while mounting the new

heating element.

BLOWER REPLACEMENT

1. Un s c rew the four scre ws on the access panel and re m ove

the panel.

2. Detach electrical wiring.

3. Unscrew the eight screws on the heater unit.

4. Un s c rew the four nuts on the heating unit of the heating

d ev i ce and re m ove the ve nt i l ation panel.

5. Remove the blower wheel (pay attention to rotation

direction).

6. Unscrew the screws on the blower unit and remove

the unit.

7. Replace blower unit.

8. Reconnect electrical wiring.

9. Reassemble access panel to the unit.

DINEX Warranty

Di n ex Inte rn at i o n a l , I n c. ( " Di n ex") wa rra nts that its DES

Eq u i p m e nt ("Eq u i p m e nt") shall be free from defe cts in

m ate rials and wo rkmanship for a pe ri od of one (1) ye a r

f rom the date of delive ry to the initial end-user ("End-

Us e r") (the "Wa rra nty Pe ri od" ) . Di n ex shall be notified of all

Eq u i p m e nt claimed to be defe ct i ve and cove red by this

wa rra nty. The End-User shall include in this notification the

s e rial number and a co py of the Bill of Lading (show i n g

d e l i ve ry date) for the Eq u i p m e nt . If Di n ex's inve s t i g at i o n

establishes the ex i s te n ce of the alleged defe ct s, then Di n ex

s h a l l , at Di n ex's choice and ex pe n s e, repair or re p l a ce the

a f fe cted Eq u i p m e nt (provided that the costs of labor on

such repairs shall only be included for pro per wa rra nty

claims asserted in writing within 1 year of delive ry date )

and reimburse End-User for the reasonable shipping co s t s

for re t u rning the Eq u i p m e nt to Di n ex , if any.

This warranty does not apply to defects in any Equipment

caused by: (1) normal wear and tear; (2) failure to comply

with any Dinex-provided operation or maintenance

instructions; (3) alteration or modification(s) by parties

other than Dinex or (4) misuse, neglect, accident, Acts of

God or other causes beyond the control of Dinex after

delivery of the Equipment by Dinex to its authorized

distributor.

Repaired or replacement Equipment under this warranty

shall be warranted for the unexpired portion of the origi-

nal Warranty Period applicable thereto plus the period

from notice to Dinex of such defect until completion of

repair or return to the point of original delivery to Buyer.

THIS WARRANTY IS IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE, WHETHER ARISING BY LAW, CUSTOM,

CONDUCT OR USAGE OF TRADE, AND THE RIGHTS AND

REMEDIES PROVIDED HEREIN ARE EXCLUSIVE AND

PROVIDED IN LIEU OF ANY OTHER RIGHTS AND

REMEDIES. DINEX SHALL HAVE NO LIABILITY OTHER

THAN AS PROVIDED IN THIS WARRANTY, WHETHER

CLAIMED IN CONTRACT, EQUITY, TORT OR OTHERWISE,

FOR OR RESULTING FROM DEFECTS IN MATERIALS OR

WORKMANSHIP OR OTHERWISE.

IN NO EVENT SHALL DINEX BE LIABLE FOR ANY

SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL

DAMAGES ARISING OUT OF OR IN CONNECTION WITH

THE EQUIPMENT, REGARDLESS WHETHER SUCH

LIABILITY SHALL BE CLAIMED IN CONTRACT, TORT,

EQUITY OR OTHERWISE.

Page 5