Aeotec AEOEZWA019 Snelstarthandleiding - Pagina 7

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Aeotec AEOEZWA019. Aeotec AEOEZWA019 8 pagina's.

Pagina afdrukken
Aeotec AEOEZWA019 Snelstarthandleiding
Dimensions
Hardware Platform
IP Class
Battery Type
Device Type
Generic Device Class
Specific Device Class
Network Operation
Firmware Version
Z-Wave Version
Z-Wave Product Id
Frequency
Maximum transmission
power

Supported Command Classes

•
Configuration Command Class, Version 4 (highest granted security level)
•
Multilevel Sensor Command Class, Version 11 (highest granted security level)
•
Multi Channel Association Command Class, Version 3 (highest granted security level)
•
Association Group Information Command Class, Version 3 (highest granted security level)
•
Device Reset Locally Command Class, Version 1 (highest granted security level)
•
Z-Wave Plus Info Command Class, Version 2 (non-Secure)
•
Notification Command Class, Version 8 (highest granted security level)
•
Manufacturer Specific Command Class, Version 2 (highest granted security level)
•
Powerlevel Command Class, Version 1 (highest granted security level)
•
Firmware Update Meta Data Command Class, Version 5 (highest granted security level)
•
Battery Command Class, Version 1 (highest granted security level)
•
Wake Up Command Class, Version 2 (highest granted security level)
•
Indicator Command Class, Version 3 (highest granted security level)
•
Association Command Class, Version 2 (highest granted security level)
•
Version Command Class, Version 3 (highest granted security level)
•
Security 2 Command Class, Version 1 (highest granted security level)
•
Supervision Command Class, Version 1 (non-Secure)
•
Transport Service Command Class, Version 2 (non-Secure)

Explanation of Z-Wave specific terms

•
Controller — is a Z-Wave device with capabilities to manage the network. Controllers are typically
Gateways,Remote Controls or battery operated wall controllers.
•
Slave — is a Z-Wave device without capabilities to manage the network. Slaves can be sensors,
actuators and even remote controls.
•
Primary Controller — is the central organizer of the network. It must be a controller. There can be only
one primary controller in a Z-Wave network.
•
Inclusion — is the process of adding new Z-Wave devices into a network.
28x95x35 mm
ZGM130S
IP 20
1 * 1/2 AA
Notification Sensor
Sensor Notification
Routing Sensor Notification
Reporting Sleeping Slave
01.00
07.12
0371.0002.0013
Europe - 868,4 Mhz
5 mW