Ariston AXIOS LUX ECO Gebruiksaanwijzing - Pagina 8

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Ariston AXIOS LUX ECO. Ariston AXIOS LUX ECO 10 pagina's.

Set Eco Evo Plus Mode

together with the "ECO EVO" mode (see "ECO EVO Function" paragraph), the

temperature is set automatically by the product itself. The User can set the time

at which the hot water should be ready. The "+"/ "-" and "SET" buttons are

deactivated in this mode. If pressed, the display shows the sign "ECO" for three

seconds. This operating mode guarantees a greater energy saving.

N N . . B B . .

For the temperature setting in Manual and Timer mode, if the user does not

make any selection for 3 seconds, the system keeps the last setting. For all the

other settings, the system saves the choice just after the "SET" button is pressed.

Diagnostic / Reset

When one of the malfunctions described below occurs, the product will enter in

a "fault status" and the HMI will display a blinking error code. In the "fault status",

the "HEATING" LED also blinks (Fig.8 as an example).

The error codes are the following:

E02  Water Overheating

E10 – E11  NTC Sensor Fault

E04  Dry Heating

E50 – E60 – E80 – E92  Maintenance Request

E90  Heating element Fault

driP  Leakage Detected (see Leakage Detection paragraph)

Reset: To reset the product, switch it off and on again by the pressing

If the cause of the malfunction disappears immediately following the reset

process, the product will resume normal operation. If the display still shows the

error code, then it is necessary to contact the Ariston Call Centre on 010 745 9911.

: When one of the timer program functions is used

Fig.8

- 7 -

button.