Aeotec Nano Shutter Handmatig - Pagina 2

Blader online of download pdf Handmatig voor {categorie_naam} Aeotec Nano Shutter. Aeotec Nano Shutter 7 pagina's. Z-wave motor controller

Aeotec Nano Shutter.

Aeotec Nano Shutter is a Z-Wave motor controller specifically used to enable Z-Wave command

and control (up/down/stop) for existing window covering motors.

It can connect to 2 external manual switches/buttons to control the motor up/down/stop

independently. Its surface has a pin socket, which can be used for connecting to the touch panel,

so you can also use the touch panel to control the Nano Shutter.

The wireless module is powered from the mains supply. In the event of power failure, non-volatile

memory retains all programmed information relating to the units operating status.

Nano Shutter is also a security Z-Wave plus device and supports Over The Air (OTA) feature for

the products firmware upgrade.

It can be a repeater in the Z-Wave network. Acting as a bridge for communication, it will forward

Z-Wave command messages to their destinations if the originating controller is out of range from

the destination node.

By taking advantage of the Z-Wave mesh network, commands can be routed to their destination

via intermediary "listening" Z-Wave products. Products that are Z-Wave certified can be used

and communicate with other Z-Wave certified devices.

Familiarise yourself with your Nano Shutter.

Page 2