Aeotec MultiSensor 7 Gebruikershandleiding - Pagina 5
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Aeotec MultiSensor 7. Aeotec MultiSensor 7 8 pagina's.
Ook voor Aeotec MultiSensor 7: Gebruikershandleiding (5 pagina's)
Pagina afdrukken
22/07/2021
2. Insert two CR123A lithium batteries orientated according to the diagram within your sensor.
Try inserting the batteries flat rather than at an angle.
Note: MultiSensor 7 can be powered by a single CR123A (doesn't matter which port), though batteries will
require changing more frequently (half the expected battery life).
WARNING: Not compatible to rechargeable CR123A batteries (3.6V).
3. Make sure to seat the Battery Cover back onto the MultiSensor 7 and lock it in by sliding the Unlock button
RIGHT.
Adding your MultiSensor 7 into a Z-Wave Network.
With it powered on, it's now time to add your MultiSensor 7 to a Z-Wave network. To pair MultiSensor 7, you are not
limited to only the Z-Stick or Minimote. You may use any Z-Wave Gateway to pair MultiSensor 7, but compatibility
and how the sensor shows ultimately depends on the gateway and software integration of products.
Using an existing gateway:
You may need to refer to your gateway's method of including devices if you do not know how to pair a Z-Wave
device.
1. Set your Z-Wave gateway into Z-Wave pair
2. Tap the Action Button on your MultiSensor once.
https://aeotec.freshdesk.com/support/solutions/articles/6000232605-multisensor-7-user-guide
MultiSensor 7 user guide : Aeotec Help Desk
mode.
5/8