Aeotec NanoMote One Bedieningshandleiding - Pagina 8

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Aeotec NanoMote One. Aeotec NanoMote One 10 pagina's.

2. Basic Command

There is no relevant commands are available for mapping.

3. Battery Command

NanoMote One

will send battery report to the lifeline group when Button is triggered during the

sleep mode. If the battery level of the Scene Controller is less than 20%, the Scene Controller will

beep 3 times when the button is pressed.

TIP:

1. The max number of associated nodes of each groups is 5.

2. Association allows for direct transmission of control command between

devices and takes place without

XIII. BUTTON FUNCTION

NanoMote One offers three button action types, including short press, held down and release.

Short press allows Scene Controller sends:

Central scene notification commands to the nodes associated nodes.

Basic set command to the nodes associated nodes.

Switch multilevel set command to the associated nodes.

Press and hold (more than 2 seconds) allows NanoMote One sends:

Central scene notification command to the associated nodes.

Multilevel start level change command to the associated nodes.

Release allows NanoMote One sends:

Central scene notification command to the associated nodes.

Multilevel stop level change command to the associated nodes.

XIV. ADVANCED CONFIGURATION

NanoMote One offers a wide variety of advanced configuration settings. Below parameters can be

the associated nodes when the Button is short pressed.

2.Switch Multilevel Start Level Change

NanoMote One

will send "Switch Multilevel Start Level Change" to

the associated nodes when the Button is held down.

3.Switch Multilevel Stop Level Change

NanoMote One

will send "Switch Multilevel Stop Level Change" to

the associated nodes when the Button is released.

the participation of the main controller.