Aeotec NanoMote Quad Gebruikershandleiding - Pagina 3
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Aeotec NanoMote Quad. Aeotec NanoMote Quad 9 pagina's.
Ook voor Aeotec NanoMote Quad: Bedieningshandleiding (10 pagina's), Snelstarthandleiding (5 pagina's), Bedieningshandleiding (9 pagina's)
Pagina afdrukken
Nano Mote Quad User Guide : Aeotec Group
4. Place the backcover back on then twist the back cover clockwise to lock the battery in place.
Adding your NanoMote Quad to your -Wave network.
With your NanoMote Quad now powered, it's time to add it to your Z-Wave network.
1. Place your Z-Wave primary controller/gateway enter into pairing/inclusion mode.
2. Take your NanoMote near to your primary controller.
3. Double click the NanoMote button (can be any button), the LED will blink rapidly with a white color.
4. I your NanoMote has been success ully added to your Z-Wave network, its white LED will be solid or about 10
seconds, then lash green to indicate it is awake. I the adding was unsuccess ul and the red LED will be solid or 2
seconds and then o , repeat the above steps.
5. I your NanoMote does not go to sleep on its own, press and hold or 2 seconds (or until LED turns orange) then
3 z 9
ttps://aeotec.fres desk.com/support/solutions/articles/6000184696-n...
9. 9. 2019, 15:53