Ariston Type C Handleiding voor installatie-instructies - Pagina 10

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Ariston Type C. Ariston Type C 25 pagina's. Type c boilers
Ook voor Ariston Type C: Handleiding voor installatie-instructies (25 pagina's), Handleiding voor installatie-instructies (48 pagina's), Instructies voor installatie en onderhoud (49 pagina's), Handleiding voor installatie-instructies (44 pagina's)

In addition, it is also possible to use a split (twin pipe)

system by fitting a special adaptor to the flue connector

and using the aperture for the air vent intake located on

the top part of the combustion chamber.

To utilise the air intake it is necessary to:

1. Remove the bottom of the air intake by cutting it with a

suitable knife (see F

. 2.8);

2. Insert the elbow into the air intake until it reaches the

lower end. (There is no need to use gaskets or sealing

componds).

The components marked * in F

depending on the type of flue system used by the installer.

. 2.9

OAXIAL

YSTEMS

. 2.10

2.9 are present or absent

Ø 80 mm

FU004A

. 2.8

FU001A

MPORTANT

For all flue systems, a restrictor

must always be inserted into the

boiler's flue connector; the

restrictor must be ø 43 or ø 41 in

diameter depending on the length

of piping indicated in Table 2.1.

The diagrams illustrate some of the

various designs for coaxial or twin

pipe flue systems.

For

fur ther

infor mation

discharge/ventilation accessories,

see the F

L U E

I P E

C C E S S O R I E S

ANUAL

FU05A

FU006A