Aeotec DSB28-ZWUS Gebruikershandleiding - Pagina 2

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Aeotec DSB28-ZWUS. Aeotec DSB28-ZWUS 8 pagina's. Home energy meter g2

23-2-2017

Your Home Energy Meter from Aeotec by Aeon Labs is comprised of two parts: the Main Body and Clamps. Once

installed, the meter will sit near your home's main circuit box, while the clamps are attached to it.

Quick start.

The installation of your Home Energy Meter has two major parts: the installation of it into your home's main circuit box

and the syncing of it to your Z-Wave network. What follows are the instructions for both parts. Please note that only a

licensed electrician, with knowledge and understanding of electrical systems and electrical safety, should perform the

electrical installation of your meter into your home's circuit box. The syncing of your Home Energy Meter with your Z-

Wave network can be performed by you.

Installing the meter into a circuit box.

Important: Only a licensed electrician should perform these steps.

Important: The circuit box's main breaker should be turned oﬀ to perform these installation steps.

The following diagrams highlight how the Home Energy Meter should be installed dependent on the region you are in;

In the United States, it is always a 2-phase installation;

Diagram of USA Version(2 Phases):

https://aeotec.freshdesk.com/support/solutions/articles/6000166671-home-energy-meter-g2-user-manual-

Home Energy Meter G2 user manual. : Aeotec by Aeon Labs

2/8