Aeotec Siren Gen5 Snelstarthandleiding - Pagina 4

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Aeotec Siren Gen5. Aeotec Siren Gen5 6 pagina's.

3. Press the Include button on your Minimote.

4. If Siren has been successfully linked to your Z-Wave network, its Network LED will no

longer blink when you short press and quickly release the Action Button on Siren. If

the linking was unsuccessful and the Network LED continues to blink when you short

press and quickly release the Action Button repeat the above steps.

5. Press any button on your Minimote to take it out of installation mode.

With your Siren now working as a part of your smart home, you'll be able to configure it from

your home control software. Please refer to your software's user guide for precise instructions

on configuring Siren to your needs. You're able to test your Siren's speaker system manually.

Please note that the speaker system is 105 dB and very loud – we recommend only testing

your Siren while wearing the necessary ear protection given you'll need to be next to your

Siren while manually testing it. To manually test Siren, press and hold the Action Button for 5

seconds.

Associating different tones with different events.

Your Siren contains 5 different alert tones, and each can be set to be used for a different type

of emergency. One tone is more relevant to intruder alerts, while others are more relevant to

the likes of water leaks, medical emergencies and door chimes. This functionality can be

setup and configured via supporting Z-Wave gateways. Please refer to your gateway's user

manual for further information.

Removing your Siren Gen5 from a Z-Wave Network

Your Siren can be removed from your Z-Wave network at any time. You'll need to use your Z-

Wave network's main controller to do this and the following instructions tell you how to do

this using Aeotec by Aeon Labs' Z-Stick and Minimote controllers. If you are using other

products as your main Z-Wave controller, please refer to the part of their respective manuals

that tells you how remove devices from your network.

Intin Manual

ENG