Ariston MTB 45D2 NFE Installatie- en gebruikshandleiding - Pagina 19

Blader online of download pdf Installatie- en gebruikshandleiding voor {categorie_naam} Ariston MTB 45D2 NFE. Ariston MTB 45D2 NFE 29 pagina's. Two-doors

Pagina afdrukken

Language setting:

The language setting is the first operation that is suggested

(via the scrolling text on the display) the first time you turn

the appliance on.

You can choose from five different languages (Italian, French,

English, Spanish and Portuguese): the display will provide

all the indications in the chosen language; should you fail to

select one, the appliance is factory-set to Italian.

If this is not the first time you turn the appliance on, first

press the MODE (D) button as many times as necessary for

the scrolling text "IMPOSTAZIONE LINGUA [+/-] / CHOIX

LANGUE [+/-] / SET LANGUAGE [+/-] / SELECCIONAR

IDIOMA [+/-] / PROGRAMAÇÃO LÍNGUA [+/-] / DIL

SECIMI [+/-]" to come up on the display; if it is the first

time you turn the appliance on, then this is not necessary.

Now you can choose the language using the ADJUST/

SELECT + (E) (scrolls forward in the list of languages available

that appear in the form of scrolling text) and/or ADJUST/

SELECT - (F) (scrolls back in the list of languages available

that appear in the form of scrolling text) buttons. Once the

language you wish to select has appeared in the scrolling

text, confirm the setting by pressing the MODE (D) button

again: the language is now enabled.

NOTE: if you do not confirm your selection by pressing the

MODE button within ten seconds of the last action

performed on the display, the latter shall go back to

displaying the language previously set and indicate that no

modification has been made.

Setting the time and date:

The time and date settings are in rapid sequence and you

cannot intervene on the date without first setting the time.

Press the MODE (D) button as many times as necessary for

the words "SET TIME [+/-]" appears in the form of scrolling

text.

Now you can set the exact time using the ADJUST/SELECT

+ (E) (to go up one hour) and/or ADJUST/SELECT - (F) (to

go back one hour) buttons. Once you have reached the time

to set, confirm the setting by pressing the MODE (D) button

once more: you should now set the minutes using the same

procedure.

Once you have set the correct time, you should set the day

and then the month and year, using the same procedure:

buttons ADJUST/SELECT + (E) and ADJUST/SELECT - (F)

for the exact digit and again the MODE button to confirm.

NOTE: if you do not confirm your selection by pressing the

MODE button within ten seconds of the last action

performed on the display, the latter shall go back to displaying

the setting previously made and indicate that no modification

has been made.