Whirlpool 1CWTW4800 Gebruiks- en onderhoudshandleiding - Pagina 10

Blader online of download pdf Gebruiks- en onderhoudshandleiding voor {categorie_naam} Whirlpool 1CWTW4800. Whirlpool 1CWTW4800 28 pagina's.

TRANSPORTING YOUR WASHER

1� Shut off both water faucets. Disconnect and drain water

inlet hoses.

2� If washer will be moved during freezing weather, follow

Winter Storage Care directions before moving.

3� Disconnect drain from drain system and drain any

remaining water into a pan or bucket. Disconnect drain hose

from back of washer.

4� Unplug power cord.

5� Place inlet hoses and drain hose inside washer basket.

6� Drape power cord over edge and into washer basket.

7� Place packing tray from original shipping materials back inside

washer. If you do not have packing tray, place heavy blankets

or towels into basket opening. Close lid and place tape over

lid and down front of washer. Keep lid taped until washer is

placed in new location.

REINSTALLING/USING WASHER AGAIN

To reinstall washer after non-use, vacation, winter storage,

or moving:

1� Refer to Installation Instructions to locate, level, and

connect washer.

2� Before using again, run washer through the following

recommended procedure:

To use washer again:

1� Flush water pipes and hoses. Reconnect water inlet hoses.

Turn on both water faucets.

2� Plug in washer or reconnect power.

3� Run washer through Casual or Casual Regular cycle to

clean washer and remove antifreeze, if used. Use half the

manufacturer's recommended amount of detergent for a

medium-size load.