Whirlpool 3LWTW4840YW Producthandleiding - Pagina 23

Blader online of download pdf Producthandleiding voor {categorie_naam} Whirlpool 3LWTW4840YW. Whirlpool 3LWTW4840YW 24 pagina's.

Pagina afdrukken

TROUBLESHOOTING

First try the solutions suggested here to possibly avoid the cost of a service call.

If you experience

Washer not performing as expected (cont.)

Not cleaning or

removing stains (cont.)

Incorrect dispenser

operation

Fabric damage

Odors

Lid locked light is

flashing

EU representative: Whirlpool Europe s.r.l., Viale Guido Borghi 27, 21025 Comerio (VA) Italy

Manufacturer: Whirlpool Corp., 119 Birdseye St., Clyde, OH 43410

Possible Causes

Using too much detergent.

Not using correct cycle for fabric type.

Not using dispensers.

Not washing like colors together.

Clogged dispenser.

Sharp items were in pockets during

wash cycle.

Strings and straps could have tangled.

Items may have been damaged before

washing.

Fabric damage can occur if load is

tightly packed.

Liquid chlorine bleach may have been

added incorrectly.

Garment care instructions may not

have been followed.

Monthly maintenance not done as

recommended.

Using too much detergent.

The lid is not closed.

A cycle was stopped or paused

using the Start/Pause/Unlock button.

The suds from too much detergent can keep washer from

operating correctly. Always measure detergent and follow

manufacturer's directions based on load size and soil level.

Use a higher soil level cycle option and warmer wash

temperature to improve cleaning.

Use Heavy cycle for tough cleaning. See the "Cycle Guide" to

match your load with the best cycle.

Use dispensers to avoid chlorine bleach and fabric softener

staining.

Load dispensers before starting a cycle. Select Fabric Softener

Added-Yes when using fabric softener.

Do not add products directly onto load.

Wash like colors together and remove promptly after the cycle

is complete to avoid dye transfer.

Use only liquid chlorine bleach in the bleach dispenser. Use only

fabric softener in the fabric softener dispenser.

Empty pockets, zip zippers, and snap or hook fasteners before

washing to avoid snags and tears.

Tie all strings and straps before starting wash load.

Mend rips and broken threads in seams before washing.

Load garments in loose heaps evenly around the basket wall.

Load with dry items only.

Use cycle designed for the fabrics being washed.

Add only 1 or 2 additional garments after washer has started.

Do not pour liquid chlorine bleach directly onto load. Wipe up

bleach spills.

Undiluted bleach will damage fabrics. Do not use more than

recommended by manufacturer.

Do not place load items on top of bleach dispenser when

loading and unloading washer.

Always read and follow garment manufacturer's care label

instructions. See the "Cycle Guide" to match your load with the

best cycle.

See "Washer Care" in Washer Maintenance.

Unload washer as soon as cycle is complete.

Be sure to measure correctly. Always follow the manufacturer's

directions.

See "Washer Care" section.

Close the lid. The washer will not start or fill with the lid open.

The washer may still be spinning. The lid will not unlock until the

basket has stopped spinning. This may take several minutes if

washing large loads or heavy fabrics.

Solution