Whirlpool 3RLBR8543 Installatie-instructies - Pagina 5
Blader online of download pdf Installatie-instructies voor {categorie_naam} Whirlpool 3RLBR8543. Whirlpool 3RLBR8543 5 pagina's. Two speed automatic washer
Ook voor Whirlpool 3RLBR8543: Gebruiks- en onderhoudshandleiding (11 pagina's), Gebruiks- en onderhoudshandleiding (12 pagina's)
Pagina afdrukken
Completing installation
CHECK ELECTRICAL REQUIREMENTS. BE SURE YOU HAVE
CORRECT ELECTRICAL SUPPLY AND RECOMMENDED
EARTHING METHOD.
Congratulations!
You have successfully installed your new Whirlpool washer. To
get the most efficient use from your new washer, read your Use
and Care Guide.
Keep Installation Instructions and Use and Care Guide.
Need assistance?
Call your dealer or local authorized service company.
When you call, you will need the washer model number and serial
number. Both numbers are on the model/serial rating plate located
under the washer lid and on the top of the washer.
Part No. 8318424 Rev. A
©2000 Whirlpool Corporation
Check that all parts are now installed. If there is an extra part, go
back through steps to see which step was skipped.
Turn on water faucets and check for leaks. Tighten couplings if there
is leaking. DO NOT OVERTIGHTEN; this could cause damage to
couplings.
Benton Harbor, Michigan 49022
Check that you have all of your tools. Check that the shipping
strap was removed from the back of the washer and used to
secure the drain hose.
Untape and plug power supply cord into earthed outlet.
Read the Use and Care Guide. Start the washer and allow it to
complete the regular cycle.
Printed in U.S.A.