Whirlpool 4GMVWC300 Handleiding voor installatie-instructies - Pagina 9
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Whirlpool 4GMVWC300. Whirlpool 4GMVWC300 27 pagina's.
Ook voor Whirlpool 4GMVWC300: Handleiding voor installatie-instructies (27 pagina's), Handleiding voor installatie-instructies (27 pagina's)
Pagina afdrukken
POWERCORD INSTALLATION
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow
these instructions can result in death,
fire, or electrical
shock.
Plug power supply cord into an grounded outlet. Turn power
supply on.
Select
plug
Select the plug that fits with the electric receptacle.
7,
Assemble
plug
8,
Secure
power
cord
Secure the power cord by seating the connection
on the cord
lock. Place the cord lock cover and push until it snaps. Make
sure the power cord connection
is seated on the cord lock and
that the cord lock clamps correctly.
COMPLETE INSTALLATION
CHECKLIST
[_ Check electrical requirements.
Be sure you have correct
electrical supply and recommended
grounding method.
[_ Check that all parts are now installed. If there is an extra
part, go back through steps to see what was skipped.
[_ Check that you have all of your tools.
[_ Check that shipping materials were completely
removed from washer.
C)
C)
C)
C)
C)
C)
_3
Check that water faucets are on.
Check for leaks around faucets and inlet hoses.
Remove film from console and any tape remaining on washer.
Check that washer is plugged into a grounded
outlet.
Dispose of/recycle all packaging materials.
Read "Washer Care" in your Use and Care Guide.
To test and clean your washer, measure 1/2 of normal
recommended
amount of powdered or liquid detergent
and pour it into washer basket or detergent dispenser
(on some models). Close lid. Select any cycle. Start washer
and allow to complete full cycle.
Assemble the plug into the end of the power cord.