Whirlpool 8003437208836 Gebruikershandleiding - Pagina 7
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Whirlpool 8003437208836. Whirlpool 8003437208836 20 pagina's.
Pagina afdrukken
User manual
OPTIONS
! If the selected function is incompatible with the set programme, the incompatibility will be signalled by a buzzer (3 beeps) .
! If the selected function is incompatible with another previously set function the function will not be enabled.
CLEAN+
Clean+ is an option working on 3 different levels (Intensive,
Daily and Fast) that are specially designed to set the right
washing action, depending on your cleaning needs:
Intensive
: this option is designed for high levels of
dirtiness, removing most stubborn stains .
Daily
: this option is designed to remove everyday stains .
Fast
: this option is designed to remove lightly soiled
stains .
INTENSIVE RINSE
By selecting this option, the efficiency of the rinse is
increased and optimal detergent removal is guaranteed . It is
particularly useful for sensitive skin . Press the button once,
two or three times to select an additional 1
rinses after the standard cycle rinse and remove all traces of
detergent . Press the button again to go back to the "Normal
rinse" rinse type .
START DELAY
To set the selected programme to start at a later time, press
the button to set the desired delay time . The symbol
lights on the display when this fuction is enabled . To cancel
the delayed start, press the button again untile the value
‚''0'' is shown on the display .
FUNCTIONS
ON/OFF
To switch on the washing machine: press the
"ON/OFF"
button, the "Start/Pause"
To switch off the washing machine during the wash cycle,
press and hold the button for approximately 3 seconds . If
the button is pressed briefly or accidentally the machine will
not switch off .
To switch off the washing machine after programme end:
press the "ON/OFF"
button until the lights go off .
KNOB
To select and confirm programmes . Turn to
select .
START/PAUSE
To start the programme, after you have finished your
settings . To pause a running programme . To continue a
paused programme .
KEY LOCK
To lock the control panel, press and hold the
"Key lock"
button for approximately 3 seconds . The
symbol
will light up on the display to indicate that the
control panel has been locked (with the exception of the
"ON/OFF"
button) . This prevents unintentional changes
to programmes, especially with children near the machine .
To unlock the control panel, press and hold the "Key lock"
button for approximately 3 seconds .
FRESHCARE+
This option enhances washing performance by generating
steam to inhibit the proliferation of the main bad odour
sources inside the machine . After steam phase, the washing
machine will perform gentle tumbling through slow
rotations of the drum . FreshCare+ option starts after the
cycle ends for a maximum duration of 6h and you can
interrupt it at any time by pressing any button on control
panel or turning the knob . Wait around 5 minutes before
door can be opened .
TEMPERATURE
Every programme has a predefined temperature . If you
want to change the temperature, press the "temperature"
button . The value appears on the display .
, 2
or 3
+1
+2
+3
SPIN
Every programme has a predefined spin speed . If you want
to change the spin speed, press the "Spin" button . The value
appears on the display .
BLEACHING
If you wish to bleach the laundry, load the washing machine
and set the "Rinse & Spin" programme .
button light up .
Start the machine and wait for it to complete the first water
filling cycle (roughly 2 minutes) . Put the machine in pause
mode by pressing the "Start/Pause"
the detergent drawer and pour the bleach (observe the
recommended doses indicated on the package) into the
main wash compartment where the partition was previously
mounted . Restart the cycle by pressing the "Start/Pause"
button .
If desired, it is possible to add fabric softener into the
appropriate compartment of the detergent drawer .
DEMO MODE
This function is only used for sales presentations . By this
you can interact with washing machine and see it working
without water . To enter Demo mode, switch the washing
machine ON and OFF again . Press and hold "Start/Pause"
button and hold both buttons for 10 seconds .
To deactivate this function, switch the washing machine
OFF . Than press and hold "Start/Pause"
5 seconds press also "ON/OFF"
buttons for 2 seconds .
button, then within 5 seconds press also "ON/OFF"
EN
button, open
button, within
button and hold both
7