Whirlpool 8316566 Handleiding voor installatie-instructies - Pagina 2
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Whirlpool 8316566. Whirlpool 8316566 8 pagina's.
Pagina afdrukken
Gather the required tools and parts before starting installation.
The parts supplied are in the washer basket.
Tools needed for connecting the drain hose and water
inlet hoses:
Pliers that open to
3.95 cm (1⁹⁄₁₆")
Parts supplied:
A
C
A. Water inlet hose (2)
B. Drain hose form
C. Large flat washer (4)
Tools needed for securing the drain hose and leveling
the washer:
Adjustable or open end
wrench 14 mm (⁹⁄₁₆")
Level
Parts supplied:
A
A. Beaded tie strap
B. Front leveling feet with nuts (2)
2
INSTALLATION REQUIREMENTS
Flashlight (optional)
B
E
D
D. Small flat washer (2)
E. Inlet hose adapter
Wood block
Ruler or measuring tape
B
Tools and Parts
Alternate Parts
Your installation may require additional parts. For ordering
information, please refer to the toll-free phone numbers on the
front page of the Washer User Instructions.
If You Have:
Laundry tub or
standpipe taller
than 2.4 m (96")
2.5 cm (1")
diameter
standpipe
Overhead sewer
Floor drain
Water faucets
beyond reach of fill
hoses
Drain hose too
short
Lint clogged drain
You Will Need to Buy:
Sump pump system (if not already
available)
3.2 cm (1¹⁄₄") diameter to 2.5 cm (1")
diameter standpipe adapter kit,
Part Number 280130
Standard 76 L (20 gal.) 99 cm (39") tall
drain tub or utility sink, sump pump and
connectors (available from local
plumbing suppliers)
Siphon break kit, Part Number 280129;
additional drain hose,
Part Number 3357090
2 longer water fill hoses:
1.8 m (6 ft) Part Number 76314,
3.0 m (10 ft) Part Number 350008
Drain hose kit, Part Number 280131
Drain protector, Part Number 367031