Whirlpool 8MWTW2024 Gebruiks- en onderhoudshandleiding - Pagina 4
Blader online of download pdf Gebruiks- en onderhoudshandleiding voor {categorie_naam} Whirlpool 8MWTW2024. Whirlpool 8MWTW2024 44 pagina's. Top-loading high efficiency washer
Ook voor Whirlpool 8MWTW2024: Gebruiks- en onderhoudshandleiding (41 pagina's)
Pagina afdrukken
WHAT'S NEW UNDER THE LID?
Your new washer will perform in a different way than your previous propeller washer.
HOW TO MAXIMIZE THE EFFICIENCY OF YOUR WASHER?
The maximum efficiency of your washer is reached when the lid is closed. Therefore we recommend you that once the washer has been
loaded with clothes, detergent and other add-ons, close the lid and start the washing cycle.
If you keep the lid open after the cycle has started will modify the preset programming to fill the washer by phases.
IMPORTANT: If once the drum as been filled with water, the lid is still open, the washer will display warning flashing lights on the board
to indicate that the lid must be closed. If the lid has not been closed in the following 10 minutes, the cycle will be cancelled and the water
in the drum will be drained automatically.
AUTO LEVEL SYSTEM
NOTE: We recommend not to add any more items after the Auto Level routine has been completed. The level of water to be
used in the cycle has been selected at this point.
THE FILLING PHASES OF THE WASHER
This is applicable for Xpert cycles only
PHASE 1: AUTOMATIC PREWASH WITH
SPINNING
The drum will be filled with a relatively low
level of water and the wash plate starts
moving to maximize the washing action.
This process contributes to clean your
clothes effectively.
*The level of filling during each phase will depend on the load size selected.
09-Feb-2018 07:28:55 EST | RELEASED
1 SPIN. The basket will spin with the garments inside. The lid is blocked at this moment.
2 DETECT. The washer will detect automatically the size of the load when it's dry.
3 FILL. The washer will fill the basket according to the optimal water level. The lid will be unlocked at
this moment.
Close the lid to maximize
the washing efficiency
In some European factories the letter "W" of the part code mentioned herein will be automatically
PHASE 2: DEEP WASH
The washer stops and fills the drum until the
selected level. This process helps to settle the
clothes in the basket and avoid tangling. After
this the clothes are ready for the deep wash
spinning.
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
4