Ariston TCF 97B Handmatig - Pagina 8

Blader online of download pdf Handmatig voor {categorie_naam} Ariston TCF 97B. Ariston TCF 97B 16 pagina's.

Pagina afdrukken

Control panel

The ON/OFF button

turned off, it counts down 3, 2, 1, Off and the programme is then cancelled. Press and hold for more than 3 seconds

and the dryer reactivates.

The PROGRAMMES knob sets the programme: rotate it until the indicator is pointing to the programme you want to

select (see Start and Programmes).

The OPTION buttons select available options for your selected programme. The lights indicate that the option has been

selected.

The START/PAUSE button/light

and the progress lights will flash to confirm the action. When a programme is running, pressing this button in pauses

the programme and stops the dryer. The light is green when programme is running, flashing amber if the programme

has been paused or flashing green if on standby waiting to start a programme.

The Display Unit gives an indication of the drying or delay time together with icons that light to give warning information

and show the status of your programmes progress.

The three buttons below the display select 'Automatic' or 'Timed Dry' and if required a delayed start (see Start and

Programmes or The Display).

The Child Lock button/light

turns on. This prevents the programme settings from being changed. When the light is lit, the other buttons are disabled.

Hold the button to cancel and the light will go out.

The Empty Water icon

to update after replacing the empty water container, the dryer must be running for this to happen (see The Controls).

Note: If the water container fills the 'water container full 'icon

off and your clothes will not dry.

The Clean Filter icon

dryer is used (see Maintenance and Care).

The Clean Condenser icon

Maintenance and Care).

PROGRAMME

knob

ON/OFF

Button

: If the dryer is running and this button is pressed and held for more that 3 seconds the dryer is

starts a selected programme. When you press this button there will be one beep

: Press and hold this button after selecting your programme and any options, the light

: signals that the water container should be emptied. The display will take a few seconds

: gives a reminder before every programme, that it is essential to clean the filter every time the

: gives a reminder that it is essential to clean the condenser at regular intervals (see

Indicator

Child Lock

Button & Light

Display Unit &

Selection Buttons

Buttons & Lights

flashes, the display shows "H20", the heat is turned

HEAT LEVEL

Button & Lights

OPTION

START/PAUSE

Button & Light