Cal Test Electronics CT4140A Gebruikershandleiding - Pagina 2

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cal Test Electronics CT4140A. Cal Test Electronics CT4140A 4 pagina's.

Cal Test Electronics

CT4140A Fuse Adapter User Guide

Cal Test Electronics products are covered by US and foreign patents, issued and

pending. Information on this publication supersedes all earlier versions. Specifications

are subject to change without notice.

Made in Taiwan

Safety Notice and Symbols

This product is designed to IEC 61010 safety requirements

WARNING A warning statement calls attention to an operating procedure, practice, or

condition, which, if not followed correctly, could result in injury or death to

personnel.

CAUTION A caution statement calls attention to an operating procedure, practice,

or condition, which, if not followed correctly, could result in damage to or

destruction of parts or the entire product.

The following symbols may appear on the product or in its documentation:

Safety is compromised if instructions are not read, understood, and followed.

WARNING Never exceed the maximum interrupt current of the fuse. The fuse protects

the equipment against short-circuit but not against over-currents.

WARNING Before use check fuse for continuity and good condition.

WARNING Install only specified fuse, or equivalent, sizing fuse to the required short

circuit current.

Never open fuse adapter while connected or energized.

Disconnect from all devices and leads before replacing fuse.

Fuse adapter should be as close to the power source as possible.

Clean fuse adapter with cloth lightly moistened with water only. Dry thoroughly before

use.

Do not use if any part is damaged. All maintenance should be referred to qualified

service personnel only.

Do not use in wet or explosive atmosphere.

Caution, see documentation for details

Fuse inside

caltestelectronics.com

450986-001 Rev. A