Whirlpool YET14JKXJW00 Gebruiks- en onderhoudshandleiding - Pagina 8

Blader online of download pdf Gebruiks- en onderhoudshandleiding voor {categorie_naam} Whirlpool YET14JKXJW00. Whirlpool YET14JKXJW00 36 pagina's. Top-mount refrigerator

Pagina afdrukken

Door and hinge removal

5/16in Hex-Head

Hinge Screw

Unplug refrigerator or disconnect

power.

Keep both doors closed until you are ready to lift them free

from the cabinet.

NOTE: Provide additional support for the doors while the

hinges are being moved. Do not depend on the door magnets

to hold the doors in place while you are working.

3. Remove the parts for the top hinge as shown in Top Hinge

graphic.

4. Lift the freezer door free from the cabinet.

5. Remove the parts for the center hinge as shown in the Center

Hinge graphic.

6. Lift the refrigerator door free from the cabinet,

7. Remove the parts for the bottom hinge as shown in the

Bottom Hinge graphic,

IMPORTANT: If you want to reverse your doors so that they

open in the opposite direction, follow these steps. If you are

not reversing the doors, see "Door and Hinge Replacement."

Door reversal (optional)

Door Stop Screw

Door Handle Sealing Screw

Flat-Head Handle Screw

Door Handle Seal Screw Front

Cabinet

Door Hinge Hole Plug

Cabinet Hinge Hole Plug

Door Handle Screw Cover

Round-Head Handle Screw

1. Remove %6 in. hex-head hinge screws from handle side and

move them to opposite side (see Graphic 1-1).

2. Remove cabinet hinge hole plugs from cabinet top and move

them to opposite side hinge holes as shown (see Graphic 1-

2).

Freezer door

1. Remove freezer handle assembly as shown. Keep all parts

together (see Graphic 2).

2. Remove door hinge hole plug, Move to opposite side as

shown (see Graphic 3).

3. Remove door handle sealing screws. Move to opposite side

of freezer door as shown (see Graphic 4),

4. Remove door stop. Move to opposite side of freezer door as

shown (see Graphic 5).

5. Position freezer handle on opposite side of freezer door.

Assemble handle on door as shown (see

Graphic 2).

6. Tighten all screws. Set aside door until hinges and refrigerator

compartment

door are in place,

Refrigerator

door

1. Remove the screw cover (see Graphic 6).

2. Remove refrigerator handle assembly as shown. Keep all

parts together (see Graphic 6).

3. Remove door hinge hole plug from refrigerator door. Move to

opposite side hinge hole as shown (see Graphic 3).

4. Remove door handle sealing screws. Move to opposite side

of refrigerator door as shown (see Graphic 4).

5. Remove door handle seal screw front. Move to opposite side

of refrigerator door as shown (see Graphic 7).

6. Remove door stop. Move to opposite side of refrigerator door

as shown (see Graphic 5),

7. Position refrigerator handle on opposite side of the

refrigerator door as shown (see Graphic 6). Drive top two

screws in handle first, Align lower portion of handle and drive

bottom screw.

8. Replace screw cover (see Graphic 6),

9. Tighten all screws. Set aside refrigerator door until bottom

hinge is installed on product,

Door and hinge replacement

Note: Graphic may be reversed if door swing is reversed.

1. Replace the parts for the bottom hinge as shown. Tighten

screws,

2. Replace the refrigerator door.

NOTE: Provide additional support for the doors while the

hinges are being moved. Do not depend on the door magnets

to hold the doors in place while you are working.

3. Assemble the parts for the center hinge as shown and tighten

all screws (see Center Hinge graphic).

4. Replace the freezer door.

5. Assemble the parts the top hinge as shown (see Top Hinge

graphic). Do not tighten screws completely.

6. Line up the doors so that the bottom of the freezer door

aligns evenly with the top of the refrigerator door. Tighten all

screws,

Final Steps

1. Check all holes to make sure that hole plugs and screws are

in place.

2. Plug in refrigerator or reconnect power.

3. Reset the controls (see "Setting the Controls" section.)

Your refrigerator has two front adjustable rollers - one on the right

and one on the left. If your refrigerator seems unsteady or you

want the doors to close easier, adjust the refrigerator's tilt using

the instructions

below:

1. Roll out the refrigerator and use a level to check the floor at

the back from side-to-side,

If needed, use shims to level the

back of the refrigerator if it is uneven. Roll the refrigerator

back into place with the rear rollers on top of any shim(s)

used so that the rear of the refrigerator is level,

2. With the rear already level and the refrigerator in place, use

the bottom leveling screws to level the refrigerator from side-

to-side. They are part of the front roller assemblies, which are

found at the base of the refrigerator on either side.

NOTE: Having someone push against the top of the

refrigerator takes some weight off the leveling screws and

rollers, This makes it easier to adjust the screws.