AEQ Phoenix Mobile Toepassingsnotitie - Pagina 6

Blader online of download pdf Toepassingsnotitie voor {categorie_naam} AEQ Phoenix Mobile. AEQ Phoenix Mobile 8 pagina's. Audio codec system
Ook voor AEQ Phoenix Mobile: Toepassingsnotitie (8 pagina's)

Pagina afdrukken

customers and that continuously transmits audio at the public IP address

212.170.163.189 .

Check that a set of headphones are connected to the front HP1 connection.

Check that AEQMaster_IP entry is listed in the Call Book and launch the call. In order

to do so...

From main screen: press Menu. Observe the "Select contact" line. If it is:

Select contact:

AEQMaster_IP

...everything is ready and the call is sent only by pressing the green key.

If the line "Select contact" presents a different name than

select this line and press

from the list, press OK to close the list and then finally press the green

AEQMaster_IP

key.

If the contact was not already created in the Call Book, you can create it from the

menu:

Main screen

create a new contact with the following parameters:

Contact: AEQMaster_IP

Module Type: IP

URI:

[email protected]

(when PROXY SIP = ON , the unit understands that, if "@sip.aeq.es" is omitted,

the destination is registered in the same server as this unit.

Speed Dial (n): (leave it as it was).

•

The top line at the screen displays (usually very fast) the status of the call, and

the different phases it goes through: Calling, Synchronizing and finally

Connected.

•

The second line should show

•

The third line should show

If the remote unit is busy, the top line will show "

•

Verify that the LED at the side of "TX PROG SYNC" key is lit green, as an

indication that the communication has been successfully established and

synchronized. If the key above HP1 is activated (illuminated) and the

APLICACIONES ELECTRONICAS QUASAR S.A.

TEL: (34) 91 686 13 00 - FAX: (34) 91 686 44 92 - E-mail: [email protected] - Web:

"select" key. The call book will be presented. Just select

ADVANCED

2. Contacts. With the help of the user manual,

AEQMaster_IP

or the current audio coding scheme.

G722

AEQMaster_IP at its right, just

Busy (486)"