Whirlpool 3XLEQ8000 Gebruiks- en onderhoudshandleiding - Pagina 7

Blader online of download pdf Gebruiks- en onderhoudshandleiding voor {categorie_naam} Whirlpool 3XLEQ8000. Whirlpool 3XLEQ8000 32 pagina's. Electric and gas dryers

Pagina afdrukken

DRYER USE

Starting Your Dryer

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from dryer.

Do not dry anything that has ever had anything

flammable on it (even after washing).

Failure to follow these instructions can result in

death, explosion, or fire.

Fire Hazard

No washer can completely remove oil.

Do not dry anything that has ever had any type of

oil on it (including cooking oils).

Items containing foam, rubber, or plastic must be

dried on a clothesline or by using an Air Cycle.

Failure to follow these instructions can result in

death or fire.

Before using your dryer, wipe the dryer drum with a damp cloth to

remove dust from storing and shipping.

1. Load clothes loosely into the dryer and close the door. Do not

pack the dryer. Allow space for clothes to tumble freely.

Maximum clothing load (cotton fabrics) is 9.1 kg (20 lb).

2. Turn the Cycle Control knob to the recommended cycle for

the type of load being dried.

3. Select a temperature setting on models with a Temp/Fabric

selector. The cycle descriptions include temperature setting

suggestions.

NOTE: The temperature selector is part of the Cycle Control

knob on some models.

4. Select the End of Cycle Signal, if available. The signal is

helpful when drying permanent press or synthetics. Promptly

remove these items from the dryer at the end of the cycle to

prevent wrinkles.

5. Select the desired option. See "Additional Features."

6. Push the START button. Your gas dryer has an electronic

ignition system for the burner which is fully automatic; no

action is needed by the user (there is no pilot light).

NOTE: Your dryer stops automatically when a cycle ends.

Stopping and Restarting

You can stop your dryer any time during a cycle.

To stop your dryer

Open the dryer door or turn the Cycle Control knob to OFF.

NOTE: The Cycle Control knob should point to an Off area when

the dryer is not in use.

To restart your dryer

1. Close the door.

2. Select a new cycle and temperature (if desired).

3. Push START.