AEQ AM-03 Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AEQ AM-03. AEQ AM-03 13 pagina's. Self-powered stereo audio monitor
Ook voor AEQ AM-03: Gebruikershandleiding (13 pagina's)

Pagina afdrukken

POWER REQUIREMENTS

2.1.

General

The description of the front and back panels of the equipment can be found on the

Section 5. Please, unfold the graphic cart to obtain a general view of equipment controls and

its connections.

2.1.1. Connecting the equipment to mains

The AM-03 is prepared to operate with voltages between 90 to 250V AC without any

previous operation. The unit's mains connector socket has a fuse box with a 500mA fuse

and a spare fuse.

Note: The AM-03 mains cable is delivered with the European normative mains plug and

other with the American normative. In some countries, it could be necessary to replace this

plug with one that complies with the local standards. If this could be your case, please,

replace the plug before operation.

2.1.2. Equipment power on

Once checked and modified, following the instructions in Section 2.1.1., the

equipment is ready to be connect to mains. Before connecting it, please, turn the power

switch to off (fig. 3).

Now turn the power switch on . If all the instructions have been followed properly, the

power on led will illuminate, and the same will happened with the central led of the led audio

phase meter (fig. 4).

The process of preparing and connecting the equipment to mains has finished. Turn

off the power of the unit and proceed with the connection of the audio signals as indicated in

Section 3.

FIGURE 3

AEQ AM‐03

Self‐powered Stereo Audio Monitor

FIGURE 4