Whirlpool CABRIO W10305227B Gebruiks- en onderhoudshandleiding - Pagina 8

Blader online of download pdf Gebruiks- en onderhoudshandleiding voor {categorie_naam} Whirlpool CABRIO W10305227B. Whirlpool CABRIO W10305227B 32 pagina's. Electronic dryer

Pagina afdrukken

Time Adjust

High

Medium

Normal

Low

Less

Extra Low

Damp

Air Only

Dryness

Temp

Level

Manud

Automatic

Cyde_

Only

Cycles Only

Drum Light

Wrinkle

Damp Dry

Shield

Signal

Cycle

Signal

Automatic Cycle Modifiers

Use the Dryness Modifier to select dryness levels for the

Automatic Cycles. Press DRYNESS LEVEL until the desired

Dryness Level setting illuminates.

Depending on your load, you may select different drying levels.

Press the DRYNESS LEVEL button and select either, More,

Normal (Default), Less or damp. Once the dryness level has been

achieved, dryer will automatically shut off.

NOTE: Once dryness level has been set, it cannot be changed

without stopping cycle and cannot be used on Manual cycles.

Timed

Cycle Modifiers

Use the Temperature Modifier to select temperatures for

the Timed Cycles. Press TEMP until the desired temperature

setting illuminates.

NOTE: Temperature modifiers cannot be used with the Auto

Dry Cycles.

Air Only

Use the Air Only Modifier for items that require drying without heat

such as rubber, plastic and heat-sensitive

fabrics. This table

shows examples of items that can be dried using Air Only.

Type of Load

Time*

(Minutes)

Foam rubber - pillows, padded bras, stuffed toys

20 - 30

Plastic - Shower curtains, tablecloths

20 - 30

Rubber-backed

rugs

40 - 50

Olefin, polypropylene,

sheer nylon

10 - 20

WRINKLE SHIELD

Setting Option

The WRINKLE SHIELD

setting helps keep wrinkles from forming

when you cannot unload the dryer promptly at the end of a cycle.

During this option, the dryer stops tumbling and then tumbles

again for a brief period.

•

Press the WRINKLE SHIELD

setting to get up to

120 minutes of heat-free, periodic tumbling at the end

of a cycle.

•

Stop the WRINKLE SHIELD

setting at any time by pressing

WRINKLE SHIELD

setting or opening the dryer door.

For the Perm Press/Casual Cycle, the WRINKLE SHIELD

setting is preset to ON. The other Automatic Cycles will retain

the WRINKLE SHIELD

setting. For example, if you select the

WRINKLE SHIELD

setting in the Normal cycle, the

WRINKLE SHIELD

setting will be on the next time you

select the Normal cycle.

NOTE: If you do not select the WRINKLE SHIELD

setting, the

dryer stops after cool down.

Damp Dry Signal Option

Select the Damp Dry Signal to alert you that your clothes are

approximately

80% dry. This is useful when you want to remove

lightweight items in a mixed load to avoid overdrying or remove

partially dry items that may need ironing.

The Damp Dry Signal is useful when drying bedsheets/linens

a mixed load. When the signal goes off, open the door to stop

the dryer, rearrange the load inside the dryer, close the door and

restart the dryer to finish the drying cycle. Rearranging the load

will aid in the drying process.

NOTE: The Damp Dry Signal is available only with the

Automatic Cycles.

Cycle Signal Option

The Cycle Signal produces an audible sound when the drying

cycle is finished. Promptly removing clothes at the end of the

cycle reduces wrinkling.

Press CYCLE SIGNAL until the desired volume (Loud, Soft, or Off)

is selected.

NOTE: When the WRINKLE SHIELD

setting is selected and the

Cycle Signal is on, a tone sounds every 5 minutes until the clothes

are removed, or the WRINKLE SHIELD

setting ends.

*Reset cycle to complete drying, if needed.

When using Air Only:

•

Check that coverings are securely stitched.

•

Shake and fluff pillows by hand periodically during the cycle.

•

Dry item completely. Foam rubber pillows are slow to dry.

NOTE: Air Only is not available with Automatic

Cycles.

Drum Light Option

On some models, select Drum Light to turn on the light inside

the dryer drum. During a cycle, if Drum Light is selected, the

drum light turns on and will remain on until DRUM LIGHT is

pressed again, the door is opened and closed, or will turn off

after 5 minutes.

When the dryer is not running, the drum light will turn on when

DRUM LIGHT is pressed or the dryer door is opened, and it will

remain on until the dryer door has been open for 5 minutes, the

dryer door is closed or DRUM LIGHT is pressed again.

Press DRUM LIGHT at any time to turn the drum light ON or OFR

Follow the progress of your dryer with the drying Status indicator

lights.

Est. Time

Remaining

_ ECOMonitor

Sensing

The beginning of a cycle and turns off 5 minutes into

the cycle.

Eco Monitor

The Eco Monitor shows your estimated energy usage compared

to the other cycles and options.