Whirlpool Cabrio,- WED7300X Gebruiks- en onderhoudshandleiding - Pagina 15

Pagina afdrukken

Whirlpool Cabrio,- WED7300X Gebruiks- en onderhoudshandleiding

Drain & Spin

An extra drain and spin may help shorten drying times for some

heavy fabrics or special-care items. Drain & Spin may also be

used for draining the washer after canceling a cycle or

completing a cycle after a power failure.

To use or change Drain & Spin setting:

1. Turn knob to DRAIN & SPIN until the Drain & Spin indicator

light glows.

2. Press START.

Modifiers

Modifiers allow you to further customize your cycles and save

energy.

Soil Level

Soil level (wash time) is preset for each wash cycle. See "Preset

Cycle Settings" in "Cycles." As you press the Soil Level pad, the

cycle time (minutes) will increase or decrease in the Estimated

Time Remaining display and a different wash time will appear. To

get the minimum wash time, press the pad until the indicator light

next to Light Soil Level illuminates. This is the shortest wash time

available for that cycle.

For most loads, use the time recommended in the preset

cycle settings.

For heavy soil and sturdy fabrics, press Soil Level to select

more wash time, if needed.

For light soil and delicate fabrics, press Soil Level to select

less wash time, if needed.

Load Size

This washer automatically selects Auto for the water level when

the cycle is selected. The Auto feature senses the size of the load

and adds the correct amount of water for the load size. You can

also manually change the water level settings.

Wash-Rinse Temp

Select a water temperature based on the type of load you are

washing. Use the warmest wash water safe for fabrics. Follow

garment label instructions.

Warm rinses leave the loads drier and more comfortable to

handle than with cold rinses. However, warm rinses also increase

wrinkling. Cold rinses may help with wrinkling and save energy.

Temperature Guide

Wash Water Temperature

Hot

Warm

Cold

NOTE: In wash water temperatures colder than 60°F (15.6°C),

detergents do not dissolve well. Soils may be difficult to remove.

Care Control Temperature Management

Care Control Temperature Management electronically senses and

maintains a uniform wash and rinse water temperature. Care

Control regulates incoming hot and cold water and is

automatically turned on when a cycle is selected. (See "Preset

Cycle Settings" in "Cycles.")

Care Control is available with Warm/Warm, Warm/Cold and Cold/

Cold settings. The water temperature in the Hot/Cold setting

depends on the water temperature at the water inlet faucets.

Care Control ensures consistent cleaning.

Today's detergents work well at temperatures above 60°F

(15.6°C).

Delay Wash (on some models)

You can use the Delay Wash feature to delay the start of a wash

cycle for up to 8 hours (depending on your model).

1. Load the washer and fill the dispensers.

2. Close the washer lid.

3. Press POWER.

4. Select the desired Cycle, Modifiers and Options.

5. Press DELAY WASH. 1H (one hour) will be displayed in the

time display window. The indicator light for Delay Wash will

glow.

6. For a longer delay time, press DELAY WASH. The Start time

will increase by 1-hour steps.

7. Press START. The countdown in hours to the wash cycle will

show in the time display window and the indicator light will

begin to flash.

NOTE: The Start indicator light will not flash when Delay

Wash is chosen. You must press Start to initiate a countdown

for the cycle to begin.

Suggested Fabrics

Whites and pastels

Bright colors

Colors that bleed or fade