Whirlpool Cabrio,- WED7300X Gebruiks- en onderhoudshandleiding - Pagina 4

Pagina afdrukken

Whirlpool Cabrio,- WED7300X Gebruiks- en onderhoudshandleiding

Gather the required tools and parts before starting installation.

The parts supplied are in the washer basket.

Tools needed for connecting the drain hose and water

inlet hoses:

Pliers that open to 1

(3.95 cm)

NOTE: Replace inlet hoses after 5 years of use to reduce the risk

of hose failure. Record hose installation or replacement dates for

future reference.

Parts supplied:

A. Drain hose form

B. Water inlet hoses (2)

C. Flat water inlet hose washers (4)

D. Beaded tie strap

Tools needed for securing the drain hose and leveling

the washer:

Adjustable or open end

wrench

" (14 mm)

Level

INSTALLATION REQUIREMENTS

Flashlight (optional)

Wood block

Ruler or measuring tape

Tools and Parts

Alternate Parts

Your installation may require additional parts. If you are interested

in purchasing one of the items listed here, call the toll-free

number on the cover or in the "Assistance or Service" section.

If You Have:

Laundry tub or

standpipe taller

than 96" (2.4 m)

1" (2.5 cm)

diameter standpipe

Overhead sewer

Floor drain

Water faucets

beyond reach of fill

hoses

Lint clogged drain

You Will Need to Buy:

Sump pump system (if not already

available)

2" (5 cm) diameter to 1" (2.5 cm)

diameter standpipe adapter,

Part Number 3363920 and connector kit

Part Number 285835

Standard 20 gal. (76 L) 39" (99 cm) tall

drain tub or utility sink, sump pump and

connectors (available from local

plumbing suppliers)

Siphon break, Part Number 285834;

additional drain hose,

Part Number 8318155 and connector kit,

Part Number 285835

2 longer water fill hoses:

6 ft (1.8 m) Part Number 76314,

10 ft (3.0 m) Part Number 350008

Drain protector, Part Number 367031