Whirlpool CEM2793BQ Handleiding voor installatie-instructies - Pagina 22
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Whirlpool CEM2793BQ. Whirlpool CEM2793BQ 48 pagina's. Commercial dryer gas or electric
Ook voor Whirlpool CEM2793BQ: Handleiding voor installatie-instructies (48 pagina's)
Pagina afdrukken
ELECTRIC DRYER ELECTRICAL CONNECTIONS
Connecting 3-Wire Connection: Optional
Use for direct wire or power supply cord where local codes
do not permit connecting cabinet-ground conductor to
neutral wire.
Connecting Neutral Wire
1. Remove center terminal block screw (A). Also remove
neutral ground wire (B) by removing green external ground
conductor screw (C).
2. Connect neutral ground wire (B) and neutral wire (white or
center wire) (D) of power supply cord/cable under center
terminal block screw (A). Tighten screw.
D
LEVELING
Leveling your dryer properly reduces excess noise and vibration.
1. Remove cardboard from beneath dryer. Place a level on top
edges of dryer, checking each side and front. If not level,
tip dryer and adjust legs up or down as shown in Step 3,
repeating as necessary.
22
3. Connect remaining wires under outer terminal block screws
(F). Tighten screws.
A
B
C
4. Connect a separate copper ground wire (G) under the green
external ground conductor screw (C) to an adequate ground.
Finally, reinstall terminal block to dryer rear panel. Secure
cover with hold-down screw.
A
B
C
G
Not Level
(FOR U.S.A. ONLY)
F
F
LEVEL
Not Level