Whirlpool Commercial Dryer Handleiding voor installatie-instructies - Pagina 22
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Whirlpool Commercial Dryer. Whirlpool Commercial Dryer 28 pagina's. Commercial dryer gas (120-volt, 60-hz) or electric (120/240-volt, 60-hz)
Pagina afdrukken
ELECTRIC DRYER ELECTRICAL CONNECTIONS
Connecting 3-Wire Connection: Optional
Use for direct wire or power supply cord where local codes
do not permit connecting cabinet-ground conductor to
neutral wire.
Connecting Neutral Wire
1. Remove center terminal block screw. Also remove neutral
ground wire by removing external ground conductor screw.
2. Connect neutral wire and neutral wire of power supply cord/
cable to center terminal block.
LEVELING
Leveling your dryer properly reduces excess noise and vibration.
1. Remove cardboard from beneath dryer. Place a level on top
edges of dryer, checking each side and front. If not level, tip
dryer and adjust legs up or down as shown in Steps 3 and 4,
repeating as necessary.
22
3. Connect remaining wires to outer terminal block.
4. Connect a separate copper ground wire from the external
ground conductor to an adequate ground.
Not Level
LEVEL
Not Level