Whirlpool DryAire LMA1053LT Handmatig - Pagina 20

Blader online of download pdf Handmatig voor {categorie_naam} Whirlpool DryAire LMA1053LT. Whirlpool DryAire LMA1053LT 32 pagina's. Drying cabinet

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before

operating.

Failure to do so can result in death or

electrical shock.

NOTE: Sharp edges may be present.

Disconnect the power to the drying cabi-

net.

Remove the component panel (see page

4-2 for the procedure).

Relay

Remove the two mounting screws and

lockwasher from the shield and remove

the shield from the component panel.

Shield

Screw

REMOVING THE RELAY

Screw &

Lockwasher

4-6

Push down on the top of the relay case and

rotate the lower rear up to unclip the relay

from the front panel.

Push Down On Front Of Relay Case

Rotate Bottom Of Relay Case Up

One at a time, loosen a wire setscrew and

pull the wire(s) out of the relay connector.

Connect the end of the wire(s) to the

terminal with the same letter/number

callout on the replacement relay. This will

help you rewire the new relay properly.

Terminal

Screw