Whirlpool WGD8800YW Installatiehandleiding - Pagina 11

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Whirlpool WGD8800YW. Whirlpool WGD8800YW 36 pagina's. Gas dryer/canadian electric dryer
Ook voor Whirlpool WGD8800YW: Gebruiksaanwijzing (8 pagina's), Gebruiks- en onderhoudshandleiding (36 pagina's)

Pagina afdrukken

Whirlpool WGD8800YW Installatiehandleiding

If you prefer, dryer may be converted to exhaust through

the bottom. You must contact your local dealer to have dryer

converted.

A. Standard rear offset exhaust installation

B. Bottom exhaust installation

Alternate installations for close clearances

Venting systems come in many varieties. Select the type best

for your installation. Two close-clearance installations are shown.

Refer to the manufacturer's instructions.

A. Over-the-top installation

(also available with one offset elbow)

B. Periscope installation

NOTE: The following kits for close clearance alternate

installations are available for purchase. Contact your local dealer.

Over-the-Top Installation:

■

Part Number 4396028

Periscope Installation (For use with dryer vent to wall vent

■

mismatch):

Part Number 4396037 - 0" (0 mm) to 18" (460 mm) mismatch

Part Number 4396011 - 18" (460 mm) to 29" (737 mm)

mismatch

Part Number 4396014 - 29" (737 mm) to 50" (1270 mm)

mismatch

Special provisions for mobile homes:

Exhaust vent must be securely fastened to a noncombustible

portion of mobile home and must not terminate beneath the

mobile home. Terminate exhaust vent outside.

Moblie Home Exhaust installation

Determine vent path:

■

Determine vent length and elbows needed for best

drying performance:

■

NOTE: Do not use vent runs longer than those specified

in Vent System Chart. Exhaust systems longer than those

specified will:

■

The Vent System Charts provide venting requirements that

will help achieve best drying performance.

Number of

90° elbows

Number of

90° elbows

NOTE: Bottom exhaust installations have a 90° turn inside the

dryer. To determine maximum exhaust length, add one 90° turn

to the charts.

Select route that will provide straightest and most direct

path outdoors.

Plan installation to use fewest number of elbows and turns.

When using elbows or making turns, allow as much room

as possible.

Bend vent gradually to avoid kinking.

Use as few 90° turns as possible.

Use following Vent System Chart to determine type of vent

material and hood combinations acceptable to use.

Shorten life of dryer.

Reduce performance, resulting in longer drying times

and increased energy usage.

Whirlpool Vent System chart

Type

of vent

Rigid metal

Maytag Vent System chart

Type

of vent

Rigid metal

Box/louvered

Angled

hoods

58 ft. (17.7 m)

64 ft. (20 m)

54 ft. (16.5 m)

48 ft. (14.6 m)

44 ft. (13.4 m)

38 ft. (11.6 m)

35 ft. (10.7 m)

29 ft. (8.8 m)

27 ft. (8.2 m)

21 ft. (6.4 m)

Box/louvered

Angled

hoods

94 ft. (28.7 m)

100 ft. (30.5 m)

90 ft. (27.4 m)

84 ft. (25.6 m)

80 ft. (24.4 m)

74 ft. (22.6 m)

71 ft. (21.6 m)

65 ft. (19.8 m)

63 ft. (19.2 m)

57 ft. (17.4 m)