Whirlpool WGD9371YW Gebruiks- en onderhoudshandleiding - Pagina 6
Blader online of download pdf Gebruiks- en onderhoudshandleiding voor {categorie_naam} Whirlpool WGD9371YW. Whirlpool WGD9371YW 40 pagina's. Installation guide
Ook voor Whirlpool WGD9371YW: Gebruikershandleiding (32 pagina's), Gebruiksaanwijzing (8 pagina's), Installatiehandleiding (36 pagina's)
Pagina afdrukken
CONTROL PANEL AND FEATURES
Not all features and cycles are available on all models.
Steam models
1
Non-steam models
1
POWER BUTTON
1
Press to turn the dryer on and off.
Press to stop/cancel a cycle at any time.
CYCLE CONTROL KNOB
2
Use your dryer's Cycle Control knob to select a cycle
for your laundry load. See "Cycle Guide" for detailed
descriptions of cycles.
3
START/PAUSE BUTTON
Press and hold to start a cycle, or press once while a cycle
is in process to pause it.
4
MORE TIME/LESS TIME for MANUAL CYCLES
Use these buttons with Manual Cycles to increase or
decrease the length of a Manual Cycle.
LED DISPLAY AND SETTINGS BUTTONS
5
When you select a cycle, its default settings will light up
and the Estimated Time Remaining will be displayed.
Use the buttons along the bottom of the display to adjust
settings. See "Cycle Guide" for available settings on each
cycle. Not all settings are available with all cycles.
6
3
2
2
3
4
Sensing
Wet
Damp
6
4
Sensing
Wet
Damp
6
Cycle Status Indicators
The indicator bar in the display will let you know
what stage the drying cycle is in process. For
more information on each stage, see "Cycle Status
Indicators".
Temperature
When using Manual Cycles or Enhanced Touch Up,
you may select a dry temperature based on the type
of load you are drying. Use the warmest setting safe
for the garments in the load. Follow garment label
instructions.
NOTE: Auto Cycles use a preset temperature that is
not adjustable.
Dryness Level
You may adjust the Dryness Level on Auto Cycles, if
desired. If items are not as dry as you would like after
an Auto Cycle, select More Dry. If items are too dry,
select Less Dry.
NOTE: Dryness Level is for use with Auto Cycles only.
Wrinkle Shield
Option
™
If you will be unable to remove a load immediately,
press the WRINKLE SHIELD
of periodic tumbling to help reduce wrinkling.
5
Steam
Control Lock
Cool
Done
Wrinkle
Down
Shield
5
Control Lock
Cool
Done
Wrinkle
Down
Shield
button to add 90 minutes
™