Whirlpool 30 " Eye-Level Gas Range Handleiding voor installatie-instructies - Pagina 15

1. Check that all parts are now installed. If there is an extra part,

go back through the steps to see which step was skipped.

2. Check that you have all of your tools.

3. Check that you have all of the range accessories, especially

oven racks. These accessories may be in the range

packaging.

4. Dispose of/recycle all packaging materials.

5. Check that the range is level. See the "Level Range" section.

6. Use a mild solution of liquid household cleaner and warm

water to remove waxy residue caused by shipping material.

Dry thoroughly with a soft cloth. For more information, see

the "Range Care" section of the User Guide.

7. Read the User Guide.

8. Turn on surface burners and oven. See the User Guide for

specific instructions on range operation.

NOTE: Odors and smoke are normal when the oven is used

the first few times.

Complete Installation

If range does not operate, check the following:

■

Household fuse is intact and tight, or circuit breaker has not

tripped.

■

Gas pressure regulator shutoff valve is in the open position.

■

Range is plugged into a grounded 3 prong outlet.

■

Electrical supply is connected.

9. When the range has been on for 5 minutes, check for heat. If

the range is cold, turn off the range and check that the gas

supply line shutoff valve is open.

■

If the gas supply line shutoff valve is closed, open it, then

repeat the 5-minute test as outlined above.

■

If the gas supply line shutoff valve is open, close it, and

contact a qualified technician.

If you need Assistance or Service:

Please reference the "Warranty" section of the User Guide to

contact service.