Whirlpool INAC900W Installatie- en gebruikershandleiding - Pagina 11

Blader online of download pdf Installatie- en gebruikershandleiding voor {categorie_naam} Whirlpool INAC900W. Whirlpool INAC900W 25 pagina's.

Always disconnect from power supply before

cleaning.

2. Clean both exterior and interior of the hood

after long lasting.

3. Fan protection grille can be detached for cleaning

by removing the screws with a screwdriver.

lt must be reinstalled after cleaned.

4. Oil dish on the grille can also be detached for

cleaning by turning the dish anti-clockwise.

5. The oil cup in the centre of the hood for holding

grease can be detached and cleaned regularly.

6. Make a habit to turn on the hood before using

stove to avoid high heat in the kitchen.

7. The two easy dismantle rotary knobs are set

bottom panel, please turn them anti-clockwise to

" " then loosen safety screw to dismount the

bottom panel. It is easy to clean and repair.

To turn easy dismantle rotary knobs to "∣" and

fasten the safety screw to set bottom panel back.

8. Please must disconnect power before installing

light bulb. To refer Item 7 to dismount bottom panel

and then fasten/loosen light bulb with socket.

Note: Only replace no more than 14W light bulb.

And light bulb MUST be equipped with international

safety mark.

AINTENANCE

& C

LEANING

Remove

Assembly

Clockwise to install

Anti-clockwise to detach

Easy dismantle rotary knobs

Safety screw