Whirlpool WVW75UC0DS Installatie-instructies en gebruiks- en onderhoudshandleiding - Pagina 8
Blader online of download pdf Installatie-instructies en gebruiks- en onderhoudshandleiding voor {categorie_naam} Whirlpool WVW75UC0DS. Whirlpool WVW75UC0DS 32 pagina's. 36" (91.4 cm) island-mount canopy range hood
Ook voor Whirlpool WVW75UC0DS: Installatie-instructies en gebruiks- en onderhoudshandleiding (28 pagina's)
Pagina afdrukken
Install In-Line Smart Kit - Optional
NOTE: Your range hood can work with either an internal or an
inline (external) blower motor system. An optional In-Line Smart
Kit (purchased separately) allows the blower motor that comes
with this range hood to be installed in a location other than
inside the range hood cavity.
CAUTION: To reduce the risk of fire and electric shock, install
this range hood only with the In-Line Smart Kit manufactured
by Whirlpool, Part Number W10692945.
For installation see the In-Line Smart Kit installation instructions.
See the "Assistance or Service" section to order.
Assemble Range Hood
1. Install transition on top of hood (if removed for shipping)
with 2 - 3.5 x 9.5 mm sheet metal screws.
A
A. Vent transition
B. 3.5 x 9.5 mm screw
2. Install the lower horizontal support to 4 lower vertical
supports with 8 - 4.2x8 mm screws.
A
B
C
A. Lower horizontal support
B. 8 - 4.2x8 mm screws
C. 4 Lower vertical supports
8
3. Install 4 upper vertical supports to the lower horizontal
B
4. Install the structure to the upper horizontal support with
support with 16 - 4.2x8 mm screws.
A
B
A. 4- Upper vertical supports
B. 16 - 4.2x8 mm screws
C. Lower horizontal support
16 - 4.2 x 8 mm screws.
NOTE: Attach the structure to the previously installed upper
horizontal support.
A
B
B.
A. Upper horizontal support
B. 16 - 4.2x8 mm screws
C