Fireray 5000 Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Fireray 5000. Fireray 5000 17 pagina's. Motorised infrared optical beam smoke detector

Pagina afdrukken

10. LASER Targeting

The system will signal Fault while in this mode

The LASER is used to align the Detector with the Reflector. It is an approximate alignment tool

only. After Auto-Align the LASER will not necessarily be pointing on the Reflector

• Use

• One press of an arrow key results in one movement of the Detector head

• Press

• Refer to Additional Detector Information for troubleshooting if LASER is not visible

DANGER

LASER RADIATION - AVOID

DIRECT EYE EXPOSURE

POWER OUTPUT < 5mW

CLASS IIIa LASER

Wavelength 630 - 680 nm

11. 'Auto' Alignment

• Select 'Auto' to automatically align the infrared beam

• Signal Strength will be shown during Alignment

• If the LASER is turned on it will not necessarily be pointing on the Reflector after 'Auto' is

run - this is normal

• If 'Auto' ends with an error code 'E- ', refer to troubleshooting

to move the LASER as close to the Reflector as possible

to turn off the LASER and return to the Settings menu

HiA: 2 minutes

LoA: 25 minutes