Clare Controls HDBaseT CM-BT20-TXRX100 Gebruikershandleiding - Pagina 10

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Clare Controls HDBaseT CM-BT20-TXRX100. Clare Controls HDBaseT CM-BT20-TXRX100 20 pagina's. Hdbaset 100m extender set

Pagina afdrukken

Product appearance

Figure 1: The HDBaseT CM-BT20-TX100 transmitter
(1) LINK
(2) HDCP
(3) Power LED
(4) RS232
(5) IR IN
(6) IR OUT
(7) HDMI IN
(8) HDBT OUT
(9) Ethernet
(10) Ethernet
(11) 24VDC
2
The HDBT Link status indicator. It illuminates when the CM-BT20-TX100
and RX100 are linked and communicating and blinks when there is an
error in the link.
The HDCP compliant indicator.
Illuminates when the output signal is HDCP
Blinks when the output signal is not HDCP
Extinguishes when there is no output
Illuminates when the device is receiving power.
RS232 connector.
Connects to a 12v IR receiver, or the provided adapter cable. The IR
signal received from this port will be transmitted via HDBaseT to the
transmitter unit for use at the source location.
IR signals received by receiver and sent via HDBaseT to the transmitter
are available for emitter use from this port.
Connect to the HDMI source device.
Connects via a single Cat5e/Cat6 cable to the HDBaseT port on the
receiver and supports bi-directional PoH.
100M Ethernet interface, one of these 2 ports is used for internet access,
and the other is connected to a computer. When properly connected, the
LED indicators on the corresponding ports blink.
Connects to the power supply.
HDBaseT Extender Set 100m User Guide