Fires of Tradition Octavia Handleiding voor installatie-instructies - Pagina 4
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Fires of Tradition Octavia. Fires of Tradition Octavia 7 pagina's. Rebate mantel
Ook voor Fires of Tradition Octavia: Handleiding voor installatie-instructies (6 pagina's)
Pagina afdrukkenCheck their fit against the hearth. Care-
fully lower the beam into position be-
tween the two legs, to define the proper
distance between them. While carefully
holding these three pieces in place, posi-
tion the two leg brackets against the
granite lugs on the inside top of each leg,
and make a mark on the wall where the
hole in the bracket rests.
F
T
I
IRES OF
RADITION
NSTALL
Step #4
Step #6
P
AGE
I
O
NSTRUCTIONS FOR
CTAVIA
It is best to do a dry fit of the legs and
beams in order to locate the mounting
brackets. Carefully place the legs into
position on the hearth, making sure that
they are the correct end up.
Note; when placing any of the granite
parts take special care to not chip any
edges. This can easily occur when a part
isn't placed properly and falls into place
when it is released.
Take care not to stand on the hearth as
this may cause it to lose level!!
Step #5
Remove the beam, and then carefully
set one of the backpanel sides into posi-
tion behind the leg. Make a small pencil
m a r k
o n
t h e
[alternatively, use a piece of tape]. This
will be your reference point for position-
ing the firebox. When the Bolero front is
mounted onto the firebox, the back of
the cast front will be in line with this
pencil line you just made. Remove side
backpanel and legs, and install the fire-
box into its proper position.
4
7
OF
h e a r t h
s u r f a c e