Caldwell 795234 Gebruiks- en montage-instructies - Pagina 4

Blader online of download pdf Gebruiks- en montage-instructies voor {categorie_naam} Caldwell 795234. Caldwell 795234 8 pagina's. Deadshot chairpod

4. Using a screwdriver, remove the 4 screws in the Chair Seat Assembly shown. Then using the same screws and

washers, attach the two Rubber Bar Holders as shown. Photo 4a and b

Photo 4a

NOTE: These screws only need to be lightly tightened. Over-tightening the screws could

damage the Bar Holder. If having trouble aligning screw holes pull Rubber Bar Holders.

5. Remove the 4 Cap Screws from the Bottom of the Chair Seat Assembly, and using the same screws, attach the

Leg Assembly as shown. Then rmly tighten the screws using the hex key provided. Photo 5a and b

Photo 5a

6. The Backpack straps can now be installed. To do this, pass the looped end under the cross bar on the back

of the chair. Wrapping the clip end around the bar, pull it through the loop and pull it tightly as shown. Then

attach the clip to the Hook assembled to the cross bar. Photo 6a-c

Photo 6b

Photo 4b

Photo 5b

Photo 6a

Photo 6c