AER HU 03 M Installatie-instructie - Pagina 2

Blader online of download pdf Installatie-instructie voor {categorie_naam} AER HU 03 M. AER HU 03 M 8 pagina's.

INSTALLATION INSTRUCTION

Installation Instruction of Wall Hang Urinal

Before installation, the wall and ﬂoor tiles should have been completed,

and the pit and water supply lines are reserved.

The distance between the center of the pipe and the wall should be in line

with the distance from the pits of the urinal.

Installation Instructions

Do not disassemble the main body, as it has been installed & commissioned

correctly & precisely before leaving the factory.

To avoid from jamming, do ﬂush the water pipe before installation.

After installation, make sure every joint safely sealed & no leaking.

Not

Disassemble

A. PREPARATION

Turn the water supply OFF.

Install or relocate the supply tubing and waste pipe as necessary to

conform to the roughing in dimensions.

Install the shut o valve.

Install adequate support framing for the wall hangers as needed.

Determine the position of the waste pipe nepple. When establishing the

nepple length, take into account the length of the urinal outlet spud and

the distance of the female collar will thread onto the waste pipe nepple.

NOTE: Add a little extra length to the nepple to allow for gasket space.

Flush

the pipe