FIRETECH FT-SL-15 Gebruiksaanwijzing - Pagina 3
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} FIRETECH FT-SL-15. FIRETECH FT-SL-15 8 pagina's. Pole mounted scene lights
Pagina afdrukkenSAFETY NOTICE & WARRANTY
WARNING: INSTALLATION MUST BE CONDUCTED BY A QUALIFIED TECHNICIAN.
IMPROPER INSTALLATION CAN RESULT IN INJURY OR DEATH.
•
Installation must be conducted by a qualified automotive electrician or emergency vehicle
technician in accordance with the applicable NFPA standard(s) and procedures (Including but not
limited to NFPA 1901, 1906, 1911, 414, 1900)
•
Improperly installed, aimed, or operated lights can create significant hazard to motorists which
can result in collision. Ensure light fixtures are installed and operated such that their beam does
not shine into oncoming traffic
•
All circuits must be fused at 125% of the rated power consumption of the loads on the circuit
•
A voltage drop greater than 10% in the power feed to a fixture could be an indicator of an
under-sized conductor. Use of improperly sized conductors will, at a minimum, result in poor
performance, and at a maximum could result in fire
•
Verify input voltage is within fixture range before installation. Voltage range information can be
found in this manual or printed on the fixture body
•
The use of personal protective equipment (safety glasses and gloves) is highly recommended
•
Allow proper cooling time before handling the fixture if it has been installed & powered to
prevent burns
•
Any modifications to the fixture will void warranty and are not authorized by the manufacturer
•
Always inspect the fixture for any damage prior to installing and DO NOT install if any damage is
present
PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION
Warranty Information: Full policy available Online at www.hivizleds.com/warranty
•
Proof of purchase may be required to validate warranty. All FireTech products are warranted for
the useful service life of the vehicle for which they were first installed
•
Improper installation, accident, physical damage, neglect, and normal wear and tear are not
covered under warranty
•
Lights operated in environments over 150° Fahrenheit are not covered under warranty
•
All advance-exchange warranty claims must be validated with HiViz Technical Support prior to
issuance of a shipping label. Failure to return defective product will result in an invoice for the full
replacement value of the product
•
HiViz Lighting will repair or replace defective product at its discretion. Replacement product will
be in similar or better cosmetic condition than the defective part
•
Warranties should be handled through the dealer/reseller the product was purchased from;
customer is responsible for delivery
•
If product is found to have damage not covered under warranty, customer will be responsible for
return shipping charges and/or cost of repair
•
Non-warranted items can be repaired at the customer's expense of parts and labor, at
the discretion of HiViz LED Lighting, who will provide an estimated repair cost before
proceeding with the repair
HiViz LED Lighting HiViz Lighting INC PO Box 565, Naples, NC 28760 Phone: 703-662-3458 Email: [email protected]
3