DIR Bellucci 8194 Gebruiksaanwijzing - Pagina 5

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} DIR Bellucci 8194. DIR Bellucci 8194 9 pagina's.

Precautions for Cleaning and Disinfection

※Please unplug the power cord before cleaning

In order to keep the surface of the beauty bed in good condition, please clean it regularly. Keep in mind that

the bed needs to be cleaned and disinfected before applying to different users. A thorough disinfection per

month is recommended.

I Metal and plastic surface

Clean metal and plastic surface and hand controls with wet cloth or weak alkaline cleaning solution. And use

small brushes in corners and other difficult-reaching places. When cleaning, rinse with clean water and dry

carefully. Do not use too much liquid or disinfectant (alcohol or chlorine) and follow the instructions of the

disinfectant manufacturer, then evaporate and dry the bed at room temperature.

II. Stainless steel surface

The surface is highly chemical resistant, which needs to be cleaned with mild detergent solution. Ammonia and

most solvents can be used to remove stains that are difficult to dye. Avoid using chlorinated solutions or

chrome plating on metal surface;

Make sure that all surfaces are dry before connecting to the main power supply and using equipment,

Do not use water spray (shower, high pressure water gun) for cleaning;

Do not clean under high temperature and high air humidity. Do not expose the equipment to the environment

that may lead to liquid pollution.

Do not use solvent for cleaning; do not use acid for cleaning;

Sterilization wears away the surface. After disinfection, please clean the surface with a clean wet towel.

III Bed surface

Please use clean soft towel to wipe the bed surface, with special leather detergent to wipe evenly. And then use

clean soft towel to wipe it clean again. Do not touch the bed surface with wet cloth, hard or acid or alkaline

chemicals, so as to avoid affecting the surface quality and service life.