DIR Damita H012 Gebruiksaanwijzing - Pagina 9

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} DIR Damita H012. DIR Damita H012 13 pagina's.

Pagina afdrukken

Operation Manual

Note: Please read the information regarding suitable positioning, before operating.

Turn on Machine

1. Turn on the power switch, the LED light will glow.

2. The control panels default is set to "Manual"

Select a Mode

1. Select "Choose Mode" and select the treatment required.

2. Temperature level, time and fan can be adjusted according to treatment.

Start/Stop

1. The machine will start to heat as per the selected working mode, during this time the LED control panel will glow.

2. The LED will continue to glow until the machine stops.

3. The arms will start movement and heating

During Operation

1. The start/stop, temperature and time indicators LED will continue to light during operation.

2. During the working mode you may alter the time and temperature by using the time/temp buttons.

Changing Current Mode

1. Push the "start/stop" key to interrupt the treatment. The arms and indicator light will enter standby mode.

2. The modes and temperature levels will shine after you have reselected a new programme.

3. Time light will be o and the indicator will show the preliminary set time.

4. Select the new mode you wish to switch to then select the "start/stop" key. The machine will now resume with the new selected mode.

Finish Treatment

1. The control panel will sound when the treatment has come to an end.

2. The arms will automatically move back to the default position and stop heating.

3. Start/Stop and Indicator light will turn o .

4. The modes and temperature levels will glow.

5. The digital time indicator will show as "0" when the machine has nished operation. The time light will then ash once per second to start counting down

any extra time.

Turn O Power Source

1. Turn o machine by the power switch.

2. Please pull out the power plug, if machine is not in use for a long period of time

Note: During operation, the fan can be turned on/o at your will. The machine can resume to original position when the set time is up. The control panel

will sound and the time will indicate as "00" and begin to re-calculate the time.