DIR Chale P02 Gebruiksaanwijzing - Pagina 6
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} DIR Chale P02. DIR Chale P02 18 pagina's.
Pagina afdrukkenASSEMBLY INSTRUCTIONS
Installation of Wall Mount Arm
Before Installation
1. Wall
The wall must be strong enough to support the arm assembly.
2. Height
The recommended height of the wall bracket is 1840/1950mm from the oor to
the bottom of the bracket. (see diagram)
3. Electric Source
An electrical power outlet must be prepared on the wall within 500mm distance
from the wall bracket.
Installation of Wall Plate & Wall Bracket
1. The wall plate and wall bracket are already attached together with bolts upon
delivery. (See diagrams)
2. With the supplied spanner, loosen the bolts and remove the wall plate
3. Use the wall plate as a template and drill three holes on the wall (please refer to
diagram for the correct drill positioning). The size and depth of the holes will be in
accordance with the bolts supplied.
4. Attach the wall bracket to the wall with the bolts, and then x with the supplied
washers.
5. Attach the wall bracket to the wall plate, and then tighten with bolts.
Caution! As the wall plate and wall bracket are subject to a large load, please make
sure that the wall plate is installed correctly and securely.
To remove the wall mount, a spanner would have been supplied, please unscrew
the bolts and remove from the wall with care.
1470mm
1630mm
Washer
Wall plate
Wall bracket
Wall
Bolt
6
DIR
www.dirsalonfurniture.uk
Wall plate
Bolt
50mm
Bolt
Nut
Wall plate
Wall bracket