Bad Elf Flex Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Bad Elf Flex. Bad Elf Flex 15 pagina's.

3. A Bluetooth settings dialog will open

4. Click on the "COM Ports" tab

5. The COM port with your device serial number labeled as "Outgoing" is the COM port you

should use for your application.

Connecting your computer via USB

Use the supplied Micro-USB cable to connect the Bad Elf Flex to your desktop or laptop

computer. Once properly connect you will see the charging indicator come on if the Flex is not

fully charged.

Install companion app

From your phone or tablet, visit

companion app for your operating system. This app is used to check the health of your

hardware, perform firmware upgrades, change settings, and stream correction data to your Bad

Elf Flex.

Using 3rd party apps

Any location-based app on iOS or Android can be used with the Bad Elf Flex. You can visit

http://bad-elf.com/apps

recommended by other customers.

Connecting an external GNSS antenna

Only use an external antenna that is designed to be used with the Flex receiver. Ensure the

antenna being connected does not exceed the voltage and current limits defined in the Flex

product specifications.

To connect an external antenna, remove the top cover by leaning it towards the back of the unit.

With the top cap removed, unscrew the helical antenna by rotating it counterclockwise as seen

from the top.

The top connector utilizes a standard SMA connector. Attach an antenna using 50 ohm cable.

Specifications

COMMUNICATIONS

USB

h ttp://bad-elf.com/app-flex

for a list of compatible apps that we've either tested or have been

USB 2.0 device via Mini-USB receptacle

USB 2.0 host OTG via supplied adapter

to download the correct Bad Elf Flex