ALCON ALCON-883BH Gebruikershandleiding - Pagina 10

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} ALCON ALCON-883BH. ALCON ALCON-883BH 15 pagina's. High quality cordlessphone system

Pagina afdrukken

 PROGRAMMING A NEW HANDSET INTO THE SYSTEM

Setting your handset unit representative number on the Base unit. First, set the POWER switch

of the Base and Handset unit to off.

BASE UNIT

NOTE

Once you press the INT button, you must complete the following procedures within 5 seconds

to successfully complete the procedure.

HANDSET

OFF

5. Press MEMO and ^ simultaneously, and set the POWER

switch to ON. The programming procedures are

successful when hearing 5 "di" sounds.

6. Set the POWER switch to the OFF position and switch it

to ON again.

7. Press CALL to see if the handset number indicator that

flashes is the handset that you just programmed.

NOTE

If you make a mistake when following the programming

procedures, repeat the above four steps again.

1. Press SEL and without releasing POWER on

the Base Unit.

2. All the LED indicators will be displayed and

also Indicator NO. 1.

3. Press SEL to change to the Remote Unit No.

that you wish to represent either "2", "3"

and "4".

4. Press the INT button.